Lens Thickness Calculator

This page works out how thick a spectacle lens ends up, from the prescription you already have and the frame it is going into. Enter the sphere and cylinder for one eye, pick a material, give the effective diameter of the lens shape and how far the lens has to be decentered, and it returns the thickest edge, the thinnest edge, the center thickness and the smallest blank the lab can cut it from. It uses the exact sagitta of each surface rather than the usual approximation, and an optional front base curve splits the lens into its two real surfaces. Use it to see what a smaller frame or a higher index would actually save you before you pay for one. It is geometry, not a lab order, and it does not choose a prescription or a lens for you.

One eye at a time. A minus lens is thick at the edge, a plus lens thick in the middle.
In whichever sign your prescription is written. The two meridians are the sphere and the sphere plus the cylinder either way.
A higher index bends light in a shallower curve, so the same power comes out thinner.
The longest measurement across the lens shape, through its boxing center. Twice the A measurement is an overestimate; the ED printed on a frame trace is the real figure.
Half of the frame PD (bridge plus one A measurement) minus your own PD. It pushes the optical center off the shape center and thickens one side.
The center on a minus lens, the edge on a plus one. Labs commonly work to about 1.0 mm in polycarbonate and 1.5 to 2.0 mm in CR-39.
Leave it at zero for the single-surface estimate. Entering the real base curve splits the lens into its two surfaces and is a little thicker at the edge.
Widget