R-Value Calculator

This tool totals the thermal resistance of a building assembly. Pick the inside and outside surface conditions and up to six layers, give a thickness for the ones priced by the inch, and it returns the total R-value, the U-factor, the metric RSI and the resistance of each layer on its own. A second action takes the cavity insulation, the framing size and the framing factor and returns the whole-wall R-value by the parallel-path method, showing how much the studs give back. Per-inch figures are midpoints of published ranges, so use the tested R printed on a board or a batt when you have it.

Calculator Type
Layer Thicknesses In
Applies to all six thickness boxes and to the thickness figures in the answer. The R-values stay per inch, because that is the unit every published material table uses; a millimetre thickness is shown with the inches it comes to beside it so the arithmetic stays checkable, and the RSI and W/m2K rows give the answer in metric.
Ignored for the fixed-R items.
Ignored for the fixed-R items.
Ignored for the fixed-R items.
Ignored for the fixed-R items.
Ignored for the fixed-R items.
Ignored for the fixed-R items.
Widget
The number printed on the batt, or depth x R per inch.
Each size is listed as it is actually sold. A 2x4 is 38 x 89 mm and a metric stud is 45 x 90 mm, so these are two product lines rather than one size converted; pick the one you are buying.
About 25% for studs at 16 in (400 mm) on centre and 22% at 24 in (600 mm), once plates, corners and headers are counted.
Widget