Deck Load Calculator

This tool turns a deck's size and design loads into the weight its structure has to carry. Enter the length, width, live load and dead load for the total, or switch to the framing mode and give the joist span, joist spacing and post spacing to see the share each member takes by tributary area, plus the footing bearing area a post needs from a soil capacity you supply. Every figure comes from numbers you type in. It is not a span table: what size joist, beam or post carries these loads is a lookup against the species, grade and local code, and this page does not make it.

Calculator Type
Units

The design load carried by the deck as a whole, from its size and the loads it is being designed for. Pick the unit you work in first.

What the deck carries in use: people, furniture, snow. In psf, or in kPa in metric. 40 psf, which is 1.92 kPa, is the usual residential design figure. Take the number that applies to your deck from your building department.
The weight of the deck itself: boards, joists, beams, railing. In psf, or in kPa in metric. 10 psf, which is 0.48 kPa, suits a softwood deck. Composite boards, a tile topping or a heavy rail push it up.
Pounds. Only used to express the live load allowance as a number of people spread evenly over the deck.
Widget
Units

Splits the same load up by tributary area, so each member gets the share of the deck it actually carries.

The clear distance the joists cross, from the ledger at the house to the beam.
Pick the centre the deck is actually framed at, whichever units you chose above. A timber centre is a construction decision rather than a unit: 12, 16 and 24 inches are what the North American span tables are written for and 300, 400, 450 and 600 mm are what is used elsewhere, and 400 mm is not 16 inches rounded off.
Centre to centre between the posts under the beam.
What the deck carries in use. In psf, or in kPa in metric. 40 psf, which is 1.92 kPa, is the usual residential design figure.
The weight of the deck itself. In psf, or in kPa in metric.
In psf, or in kPa in metric, where 1500 psf is 71.8 kPa. Only used for the footing size. Get the figure for your site from the building department or a soils report. Leave at 0 and the footing rows are left out.
Widget