Self-Leveling Concrete Calculator

This calculator turns a floor area and a pour depth into bags of self-levelling underlayment. Enter the room length and width, how deep the compound will sit, and the coverage the bag states at 1/8 inch, and it returns the volume in cubic feet, the yield of one bag, the bags to buy with a waste allowance, the weight to carry and the material cost. A second tab handles a floor that falls from one side to the other, where the depth over the high point and the depth over the low point give an average. The coverage is your input rather than a built-in list, because it differs from product to product and a borrowed figure would misprice every bag.

Calculator Type
Measure In
Every figure you enter and every answer below follows this choice.
Inches. Write eighths as decimals: 1/8 is 0.125, 1/4 is 0.25, 1/2 is 0.5. Most products want at least 1/8 inch.
Mix left in the bucket, an overfilled low spot and the bag you open and do not finish.
Printed on the bag: square feet at 1/8 inch if you chose feet, or square metres at 3 mm if you chose metres. Common 50 lb underlayments state 44 to 50 square feet at 1/8 inch; a 20 kg bag is usually 4 to 5 square metres at 3 mm. Leave it blank for 50 square feet, or 4.5 square metres.
Blank means a 50 lb bag.
Widget
Measure In
Every figure you enter and every answer below follows this choice.
The thinnest the compound will be, in inches. Most products want at least 1/8 inch even over the high spot.
The high point depth in inches, plus however far the floor drops across the room.
Mix left in the bucket, an overfilled low spot and the bag you open and do not finish.
Printed on the bag: square feet at 1/8 inch if you chose feet, or square metres at 3 mm if you chose metres. Common 50 lb underlayments state 44 to 50 square feet at 1/8 inch; a 20 kg bag is usually 4 to 5 square metres at 3 mm. Leave it blank for 50 square feet, or 4.5 square metres.
Blank means a 50 lb bag.
Widget