Gift Wrap Calculator

Enter the length, width and height of a box and this returns the rectangle of wrapping paper it takes, with the seam overlap and the end flaps included. A second action puts that sheet on a roll of a given width, picks the orientation that wastes less, and counts how many boxes the roll covers and how many rolls a pile of presents needs. A third works out ribbon for a single cross, including an allowance for the bow. Every figure comes from the geometry of the box rather than a rule of thumb, and the overlap and fold margin are yours to set. It assumes a rectangular box wrapped in one piece.

Calculator Type
Measurements In
Every length on the form uses this unit, roll sizes included.

The size of the single rectangle you need to cut for one box.

How far the two edges of the paper lap over each other along the seam.
On top of the half height each end already needs. Raise it for stiff or slippery paper.
Widget
Measurements In
Every length on the form uses this unit, roll sizes included.

The same sheet taken off a roll of a given width, in whichever of the two orientations fits and wastes less.

The short way across the roll. Most gift wrap is 24 to 30 inches.
In the same unit. A 15 foot roll is 180 inches.
How far the two edges of the paper lap over each other along the seam.
On top of the half height each end already needs. Raise it for stiff or slippery paper.
Widget
Measurements In
Every length on the form uses this unit, roll sizes included.

Ribbon tied once round each way, with an allowance for the bow and the knot.

Same unit as the box. Leave at 0 to skip the spool count.
Widget