Concrete Block Wall Cost Calculator

This calculator prices a concrete block wall from its length, height and openings. It counts the blocks at 1.125 per square foot of face, rounds the mortar bags up, adds vertical bar and bond beam steel at the spacing you give, and returns a cost line for each of blocks, mortar, rebar, grout and labour along with the total, the cost per square foot and the cost per linear foot. A second tab prices a block count you already have. Every rate is yours to enter, because block, mortar and mason prices move by region and month and a built-in figure would be wrong somewhere the day it was written.

Calculator Type
Units
The block itself is the nominal 8 x 16 inch unit either way, so only your dimensions and the prices per length or volume change.
Total face area of every opening, taken off before the blocks are counted. Square feet, or square metres when Metric is selected.
The face is 8 x 16 inches, or 400 x 200 mm, whatever the width, so the block count is the same. The width decides what one block costs and how much grout a core takes. The metric widths are the specified 140, 190 and 290 mm units rather than a conversion of the inch figures.
Ask the yard for the delivered price of the unit you are using. A 12 inch block costs well over a 6 inch one.
Take the spacing off your drawings. A bar at each end of the wall is counted as well as the ones between.
One bar the length of the wall per course is counted.
Per foot of bar, or per metre when Metric is selected.
Cubic yards, or cubic metres when Metric is selected. Leave at zero for an ungrouted wall. The block fill calculator works this figure out from the cell spacing.
Per cubic yard, or per cubic metre when Metric is selected.
Masons often quote by the block. Leave at zero to price materials only.
Caps, ladder reinforcement, delivery, scaffold hire, permit.
Widget
Report the Wall Face In
The face is 8 x 16 inches, or 400 x 200 mm, whatever the width, so the block count is the same. The width decides what one block costs and how much grout a core takes. The metric widths are the specified 140, 190 and 290 mm units rather than a conversion of the inch figures.
Widget